How to Choose an Axial Fan for Ventilation in Shenzhen's Humid Climate

Company News · 2026.11.19

How to Choose an Axial Fan for Ventilation in Shenzhen's Humid Climate

A practical guide to selecting axial fans for ventilation in Shenzhen's humid climate, covering factory ventilation, kitchen makeup air, smoke exhaust, and energy efficiency.

Shenzhen's subtropical monsoon climate brings long, humid summers and mild winters, putting factories, commercial kitchens, underground garages, and warehouses under constant pressure from heat, moisture, and poor air quality. Inadequate ventilation doesn't just reduce employee productivity and leave lingering odors—it can also fail fire safety inspections and environmental compliance checks. Axial fans, with their compact design, high airflow, and flexible installation, have become one of the most widely used devices for ventilation and smoke exhaust in Shenzhen. However, improper selection often leads to insufficient airflow, noise complaints, high energy consumption, or even motor burnout. This article outlines the selection logic and practical implementation points for axial fans based on real-world conditions.

1. Clarify the Application: Ventilation vs. Smoke Exhaust Are Two Different Things

Many buyers confuse "ventilation" with "smoke exhaust," which is the root cause of selection errors. Ventilation aims to dilute pollutants, control temperature and humidity, and supply fresh air—it's a daily operating condition. Smoke exhaust, on the other hand, requires rapid capture and removal of fumes and odors at concentrated points, often integrated with electrostatic purification or water spray systems. The requirements for airflow determination, duct resistance, and continuous operation duration differ between the two.

In typical Shenzhen applications, axial fans serve three main roles: first, local supply/exhaust and general ventilation on factory walls; second, makeup air in kitchen exhaust systems to prevent negative pressure causing fume leakage; third, mechanical ventilation in equipment rooms, warehouses, and underground spaces. Only after clarifying the role can you determine installation location, control method, and protection rating.

2. Factory Ventilation: Focus on Air Changes and Airflow Organization

For workshop ventilation, the key is to determine the required air changes per hour based on the space volume and heat load, then select the fan model accordingly. In high-temperature or dusty workshops, it's advisable to combine axial fans with roof turbo ventilators or negative pressure fans to create a organized airflow path from clean areas to contaminated areas. Pay attention to the fan's blade angle and speed—these affect airflow and noise. For continuous operation, choose motors with appropriate insulation class and protection rating (IP54 or higher) to withstand humidity and dust.

In Shenzhen's humid environment, motors should have moisture-proof treatment to prevent insulation failure. Additionally, consider using variable frequency drives (VFDs) to adjust speed based on actual demand, saving energy during low-load periods.

3. Kitchen Makeup Air: Balance is Critical to Prevent Fume Leakage

Commercial kitchens often have powerful exhaust hoods that can create negative pressure, causing fumes to leak into dining areas or neighboring spaces. Axial fans used for makeup air must be sized to match the exhaust airflow—typically 80-90% of the exhaust volume—to maintain slight negative pressure while ensuring proper capture. The makeup air should be filtered and, if necessary, tempered to avoid discomfort. In Shenzhen's hot climate, evaporative cooling or water-cooled fresh air units can be integrated to supply cool, fresh air.

For kitchen exhaust purification, axial fans are often used in conjunction with electrostatic precipitators or UV units. Ensure the fan is installed downstream of the purification device to avoid grease buildup on blades, which can cause imbalance and vibration. Regular cleaning and maintenance are essential.

4. Smoke Exhaust Systems: Compliance with GB 51251

In buildings requiring smoke control systems, axial fans may be used for smoke exhaust or pressurization. These fans must meet the requirements of GB 51251 (Standard for Smoke Control and Exhaust Systems in Buildings), including high-temperature operation (e.g., 280°C for 30 minutes for smoke exhaust fans) and fire-rated motors. Selection should be based on calculated smoke exhaust volume and duct resistance, not just nominal airflow. It's crucial to choose products certified for fire safety and to verify performance data from reputable testing laboratories.

For underground garages, axial fans are often used for both daily ventilation and smoke exhaust. In such dual-purpose systems, fans must be capable of switching between normal and emergency modes, with automatic controls and backup power.

5. Energy Efficiency and Noise Control

GB 19761 specifies energy efficiency limits for fans. Selecting high-efficiency models reduces operating costs and carbon footprint. Look for fans with optimized blade profiles and efficient motors (IE3 or higher). Noise is another common concern, especially in residential or mixed-use areas. Choose low-noise models, install silencers, or use vibration isolation mounts. In Shenzhen's dense urban environment, noise regulations are strictly enforced, so it's wise to conduct a noise assessment during planning.

Frequently Asked Questions

Q: How do I determine the right airflow for my workshop?

A: Calculate the required air changes per hour based on the space volume and heat load. For general workshops, 6-10 air changes per hour are common; for high-heat or dusty areas, increase accordingly. Use the formula: Airflow (m³/h) = Room Volume (m³) × Air Changes per Hour. Then select a fan that delivers this airflow at the required static pressure.

Q: Can I use an axial fan for kitchen exhaust?

A: Axial fans are generally not suitable for direct kitchen exhaust because grease and particles can accumulate on blades, causing imbalance and fire hazards. Instead, use axial fans for makeup air or in ducted systems after proper filtration and purification. For direct exhaust, centrifugal fans with grease filters are recommended.

Q: What maintenance do axial fans require in humid climates?

A: Regular inspection and cleaning of blades and motor housing to prevent corrosion and dust buildup. Check motor insulation and lubrication. Ensure proper drainage if installed outdoors. In coastal areas like Shenzhen, consider stainless steel or anti-corrosion coatings for extended life.

Conclusion

Selecting the right axial fan for ventilation in Shenzhen requires a clear understanding of the application, careful calculation of airflow and pressure, and attention to energy efficiency and noise. By following industry standards and considering the local climate, you can ensure reliable, efficient performance. For tailored advice and high-quality axial fans that meet GB standards, contact XCFFJ—your trusted partner in ventilation and cooling solutions.

Call UsGet a Quote

CONTACT CHANNELS

Choose a contact channel

Choose your preferred platform and tap an account to copy it.

Phone18666386641Call Now Email1031420392@qq.comOpen Email